home *** CD-ROM | disk | FTP | other *** search
- The source and destination are the same and are removable. Will you need to eject the device between steps?
-
- This copies a partition over another partition. First, you will choose the source to copy from...
-
- Partition Copy failed!
-
- Partition Copy was successful.
-
- Because possible Partition Map corruption was detected, this function is quitting. (Re: Special Menu's Check Partition Quality)
-
- Because Source Partition is password protected, this function is quitting. (Re: Setup Menu's "Volumes...")
-
- Because Destination Partition is password protected, this function is quitting. (Re: Setup Menu's "Volumes...")
-
- Partition Copy failed!
-
- Partition Map on selected device could not be read (I/O error )! Programming error, or repair may be needed.
-
- Select the starting block on the first device compare to:
-
- Select the ending block to compare on the first device. (last possible is shown):
-
- Select the starting block on the second device to compare against:
-
- Select first SCSI Device containing data you wish to compare:
-
- Select second SCSI Device containing data you wish to compare (may be same as first):
-
-